£1,675.63 Ex. VAT
- Additional information
Main features & functions
- Super smooth stable arc from 5 or 10 amps upwards on both AC & DC.
- Variable AC frequency 25hz-200hz.
- Extended AC balance control up to 95% neg through to 95% positive.
- Instant arc starting every time you press the torch switch.
- Up slope & down slope controls for perfect weld starts & finishes.
- Post flow gas control for contamination free finishes.
- 2T standard torch trigger & 4T torch trigger latching.
- MMA ARC welding function welds all rods including cellulosic 6010 etc.
- MMA ARC welding with both DC & AC current.
- Digi meter shows preset then precise A when welding for EN1090 etc.
- Remote socket to accept foot control or torch amps control etc.
- Very simple to set up & use, anyone can use it in seconds.
- Built in automatic compensation for varying supply & long cables.
- Dual voltage input 230/400V, connect to single phase or 3 phase supply.
- Generator friendly design (even unstable generators are no problem).
- Very efficient design to minimise power consumption.
- Suitable for use inside or outside (site welding etc) (IP23S rating).
Green, low energy consumption gives you more welding for lower running costs, save up to £900 per year on electric against older type machines.
DC TIG performance
On DC TIG the high OCV guarantees instant arc starts & is perfectly smooth, stable & quiet right through from min to max power. The output power is set precisely on the amps knob & shows on the digi meter prior to actually welding, when welding the actual value is displayed on the meter. Slope in & out gives perfect starts & finishes to every weld. Variable gas post flow control ensures coverage of shielding gas for the weld pool & electrode at the finish.
AC TIG performance
On AC TIG the arc starts instantly & is perfectly smooth & stable even at minimum amps. The output power is set precisely on the amps knob & shows on the digi meter prior to actually welding, when welding the actual value is displayed on the meter. The extended AC balance control allows you to change the AC balance through an extended range & is a really useful feature. This can be set to any position from 95% negative for maximum heat into the weld pool right through to 95% positive for maximum cleaning effect. By running a high % of negative balance the heat input into the TIG torch is substantially reduced & the heat into the job increases significantly. This allows you tackle those thicker jobs like heavy castings etc & its extends the range of the electrode so you can even run a 3.2 electrode with an air cooled torch up to 300A short term. The balance control also allows you to change the output from AC to DC – or DC+ output (reverse polarity). The variable AC frequency controls the heat spread of the arc, at low frequency’s such as 25hz the arc is soft & has a wide spread, as the frequency is increased the arc constricts to give a more focused narrow spread of heat. Again the slope controls & post flow gas control give perfect starts & finishes to every weld.
MMA ARC welding performance
On MMA welding the high OCV & built in hot start gives perfect fast arc starts on all types of electrodes. The digital meter displays precise amps values. The arc is perfectly smooth & stable on all rods from 1mm upwards & DC or AC current can be used. In addition cellulosic type electrodes 6010 etc can also be run perfectly, most machines won’t touch these. Many AC DC TIG machines won’t weld AC MMA, for some welding applications AC current is needed, our OXFORD models do it so well & you will find the arc is far superior to the old oil cooled or air cooled transformer types. In addition the AC features like balance & frequency controls allow the arc characteristics to be changed to suit each job, for instance you can increase penetration or reduce penetration by changing the AC balance.
giving you more amps out for less input power. This allows us to go right up to 330A on a 32A 230V single phase supply!
So whats the drawback? These are a quality British made product so they are a little more expensive than a cheap imported inverter, but are certainly more reasonably priced than other quality offerings from Europe or the US. The other thing to consider is portability; our OXFORD models are not as portable as a small inverter, but are much more portable than an old type machine. Unless portability is of upmost importance then our OXFORD machines are the wise choice for a quality high performance TIG welder that will keep welding year after year.
PLEASE NOTE: AROUND 30 working DAYS + DELIVERY AS THESE MACHINES ARE BUILT TO ORDER. PLEASE CALL US AS WE MAY HAVE SOME IN STOCK THAT CAN BE SHIPPED NEXT DAY.